The two hole anchor can well work with thin wall precast concrete and light precast concrete. The head of two hole anchor is identical to the spread anchor and flat anchor and plate anchor. There are second hole to cross through reinforcement rebar in the precast concrete. The two hole anchor need to cast in concrete with removable recess former.
The two hole anchor can well work with thin wall precast concrete and light precast concrete. The head of two hole anchor is identical to the spread anchor and flat anchor and plate anchor. There are second hole to cross through reinforcement rebar in the precast concrete. The two hole anchor need to cast in concrete with removable recess former.
Our Two-Hole Anchor is a low-profile insert optimized for stripping and handling of panels where spread-type anchors cannot be used. When used with a tension bar, the anchor can achieve high tension loads in low compressive strength, thin precast panels. The anchor may cause spalling when pulling in shear parallel to the face of the anchor therefore shear loads should be applied perpendicular to the face of the anchor at the center of the recess.Provides a strong and stable anchoring solution capable of withstanding significant loads and forces.Enhances structural integrity and safety by preventing movement or displacement of anchored objects.Suitable for a wide range of applications across construction, industrial, and infrastructure sectors.Can be customized in size and configuration to accommodate specific project requirements.
